Zhejiang Kende Mechanical & Electrical Co., Ltd Welding Equipment Manufacturers Zhejiang Kende Mechanical & Electrical Co., Ltd is a professional Welding Equipment Manufacturers and Welding Equipment Factory, currently Kende has nearly 200 national patents, utility model patents and industrial design patents. We specialize in custom Welding Equipment and other products. At present, KFC has become a patent demonstration enterprise and a welding machine industry enterprise. KENDE trademark has become a well-known brand in the country, province, city and industry. Kende is also a major player in the drafting of welding machine industry standards, participating in the formulation of 20 national and industry standards. Kende was the first to obtain ISO 9001 International Quality Management Standard, OHSAS 18001 Occupational Health and Safety Management System and ISO 14001 Environmental Management System certification. Kende produces and exports nearly 1.2 million units of welding machines, chargers and heaters annually, with an annual production capacity of 2 million units. Kende is one of the largest producers and exporters of welding machines, chargers and heaters in the world. Kende provides nearly 1,000 product varieties in 10 categories, which can fully meet the various needs of different customers in different countries and regions. Kende welcomes your cooperation. product category:IGBT Inverter MMA or Stick Welding Machine/TIG Or GTAW Welding/MIG\MAG Or GMAW/SPOT Welding/PLASMA CUTTING/BATTERY CHARGING\STARTER/Welding Accessories Inverter Plasma Cutter Manufacturers IGBT Inverter Air Plasma Cutter，Metal case with plastic frame Portable ,Single voltage 230V 40 Amp Output,10mm clean cut ● Small but powerful machine can clean cut mild steel, stainless steel, aluminum, galvanized steel, brass and copper up to 1/4in., and aluminum up to 3/16in. with ease ●Drag Torch Technology allows for the dragging of the tip directly on the surface of the material for smooth and precise cuts ●Easy-to-use operation off a 120 Volt power source and 1.5 CFM of compressed air (Air compressor required, but not included) ●Built-in regulator and air dryer make operation a breeze ●Lightweight and portable generator-friendly design with a built-in top handle for easy movement from jobsite to jobsite ●Rugged all-metal case can handle the tough day-to-day jobs IGBT Inverter Air Plasma Cutter，Metal case with plastic frame Portable ,Single voltage 230V ,digital Display, 40 Amp Output,10mm clean cut ● Small but powerful machine can clean cut mild steel, stainless steel, aluminum, galvanized steel, brass and copper up to 1/4in., and aluminum up to 3/16in. with ease ●Drag Torch Technology allows for the dragging of the tip directly on the surface of the material for smooth and precise cuts ●Easy-to-use operation off a 120 Volt power source and 1.5 CFM of compressed air (Air compressor required, but not included) dryer make operation a ●Built-in regulator and air breeze ●Lightweight and portable generator-friendly design with a built-in top handle for easy movement from jobsite to jobsite ●Rugged all-metal case can handle the tough day-to-day jobs Car Battery Charger Manufacturers Series Battery Charger CB-6E This charger and engine starter features heavyduty construction for strong starting power. Equipped with an output voltage of 6 and 12 volts, users can apply the 6V/12V. Manual Battery Charger/Engine Starter to charge standard, AGM, and gel batteries. This manual battery charger/engine starter is easily stored with its convenient storage profile, including clamps on the front, a retractable handle.
