FCC - OET TCB Form 731 Grant of Equipment Authorization 1 of 2 TCB https://apps.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm?mode=... TCB GRANT OF EQUIPMENT AUTHORIZATION Certification Issued Under the Authority of the Federal Communications Commission By: PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany Date of Grant: 11/02/2018 Application Dated: 11/02/2018 Qixiang Electron Science& Technology Co., Ltd Qixiang Building, Tangxi Industrial Zone, Luojiang Quanzhou, Fujian, 362011 China Attention: Ken Xu NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: Name of Grantee: Grant Notes EF T4KD878UV Qixiang Electron Science& Technology Co., Ltd Equipment Class: Licensed Non-Broadcast Transmitter Held to Face Notes: Digital DMR and analog UHF/VHF Two Way Radio Frequency Output Frequency FCC Rule Parts Range (MHZ) Watts Tolerance 22, 90 136.0 - 174.0 7.0 5.0 PM Emission Designator 11K0F3E EF ES EF ES 22, 90 22, 90 136.0 - 174.0 136.0 - 174.0 7.0 7.0 5.0 PM 5.0 PM 7K60FXD 7K60FXW EF EF ES 22, 90 22, 90 406.1 - 480.0 406.1 - 480.0 6.0 6.0 5.0 PM 5.0 PM 11K0F3E 7K60FXD EF ES EF 22, 90 22, 90 406.1 - 480.0 136.0 - 174.0 6.0 0.2 5.0 PM 5.0 PM 7K60FXW 11K0F3E EF ES EF ES 22, 90 22, 90 136.0 - 174.0 136.0 - 174.0 0.2 0.2 5.0 PM 5.0 PM 7K60FXD 7K60FXW EF EF ES 22, 90 22, 90 406.1 - 480.0 406.1 - 480.0 0.2 0.2 5.0 PM 5.0 PM 11K0F3E 7K60FXD EF ES 22, 90 406.1 - 480.0 0.2 5.0 PM 7K60FXW Power output listed is rated conducted. This device also supports 5/2.5 W for VHF and 4.5/2.5W levels for UHF and must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn SAR compliance is limited to beltclips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum of 2.5cm between the device, including its antenna, and the user's body. The highest reported SAR values for Face held and Body-worn accessory are for VHF: 0.27 W/Kg and 0.5 W/Kg for UHF: 0.48 W/kg and 2.99 W/kg 29/10/2019 10:15 FCC - OET TCB Form 731 Grant of Equipment Authorization 2 of 2 https://apps.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm?mode=... respectively when operating at 50% duty cycle. EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. ES: This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. 29/10/2019 10:15